Radial lead capacitor and aluminum capacitor manufacturer

01.

LBX Series

● National Pioneer High reliability high temperature range, for +150℃ use
● Suited for automobile electronics where heavy duty services are indispensable
● Life time: +150℃ 1000 to 2000 hours.

● RoHs Compliant.

Specification

LBX Series

Item

Performance Characteristics

Category Temperature Range

-55℃ to +150℃(10 to 100Vdc) -40℃ to +150℃(160.200Vdc) -25℃ to +150℃(350.400Vdc)

Rated voltage range

10 to 400Vdc

Capacitance tolerance

±20%(M) ( at 20℃, 120Hz)

Leakage Current Dissipation Factor (tan δ)

10 to 100Vdc: I≤0.01CV or 3μA whichever is greater

Where, I: Max. leakage current (μA), C: Nominal capacitance (μF), V: Rated voltage(V) ( at 20℃ after 2 minutes)

Low Temperature Characteristics (Max. Impedance Ratio) (tan δ)

Rated Voltage (Vdc)	10	16	25	35	50.63	80.100	160.200	350.400
tanδ(Max.)	0.20	0.16	0.14	0.12	0.10	0.08	0.20	0.24

When nominal capacitance exceeds 1,000μF, add 0.02 to the value above for each 1,000μF increase (at 20℃，120Hz)

Endurance

Rated Voltage (Vdc)	10	16	25	35	50.63	80.100	160.200	350.400
Z(-25℃)/Z(+20℃)	3	2	2	2	2	2	3	6
Z(-40℃)/Z(+20℃)	4	4	4	4	4	4	4	-

( at 120Hz)

Shelf Life

The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied for the specified period of time at 150℃

Capacitance change	≤±30% of the initial value.
D.F. (tan δ)	≤300% of the initial specified value.
Leakage current	≤ The initial specified value.

Case Dia	Lifetime (hours)
φD≤12.5	1000
φD≥16	2000

The following specifications shall be satisfied when the capacitors performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20℃ after exposing them for 500hours at 150℃ without voltage applied.

Capacitance change	≤±30% of the initial value.
D.F. (tan δ)	≤300% of the initial specified value.
Leakage current	≤The initial specified value.

DIMENSIONS [mm]

LBX Series

这里可以自定义设置

ΦD	5	6.3	8	10	12.5	16	18
φd	0.5	0.5	0.6	0.6	0.6	0.8	0.8
F	2.0	2.5	3.5	5.0	5.0	7.5	7.5
φD’				φD+0.5max.
L’				L+2.0max.

RATED RIPPLE CURRENT MULTIPLIERS

Frequency correction factor for ripple current

10 to 100V:
Freq.(Hz)	120	300	1K	10k to more
CV	120	300	1K	10k to more
CV＜1000	0.50	0.64	0.83	1.00
CV≥1000	0.67	0.79	0.91	1.00

160 to 400V:
Freq.(Hz)	120	300	1K	10k	100k
Cap.(μF)
Cap.≤33	1.00	1.25	1.50	1.75	1.80
Cap.≥47	1.00	1.15	1.30	1.40	1.50

The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced.

STANDARD RATINGS

(Ripple current: mArms/150℃ 100kHz)

WV(Vdc)	Cap(μF)	Case size φD×L(mm)	tan δ	Ripple current mArms/105℃,100kHz
10(1A)	330	10×16	0.20	300
	470	10×20	0.20	400
	1000	12.5×25	0.20	600
	2200	16×30	0.22	1000
	3300	18×35	0.24	1200
	4700	18×40	0.26	1300
16(1C)	220	10×16	0.16	300
	330	10×20	0.16	400
	470	12.5×20	0.16	600
	1000	16×25	0.16	800
	2200	18×35	0.18	1200
	3300	18×40	0.20	1300
25(1E)	100	10×12.5	0.14	250
	220	12.5×20	0.14	500
	330	12.5×25	0.14	600
	470	16×25	0.14	800
	1000	16×30	0.14	1000
35(1V)	1	10×12.5	0.12	35
	2.2	10×12.5	0.12	50
	3.3	10×12.5	0.12	60
	4.7	10×12.5	0.12	85
	10	10×12.5	0.12	175
	22	10×12.5	0.12	200
	33	10×12.5	0.12	225
	47	10×12.5	0.12	250
	100	10×20	0.12	400
	220	12.5×25	0.12	600
	330	16×25	0.12	800
	470	16×30	0.12	1000
	1000	18×40	0.12	1300
50(1H)	100	10×12.5	0.10	380
	220	10×20	0.10	640
	330	12.5×20	0.10	770
	470	12.5×25	0.10	960
	560	12.5×30	0.10	1080
	680	16×25	0.10	1190
	1000	16×30	0.10	1420
63(1J)	56	10×12.5	0.10	430
	68	10×16	0.10	560
	100	10×20	0.10	710
	220	12.5×25	0.10	1040
	330	12.5×30	0.10	1170
	470	16×25	0.10	1280
	560	16×30	0.10	1520
	680	16×35	0.10	1520
80 (1K)	33	10×12.5	0.08	420
	47	10×16	0.08	550
	56	10×20	0.08	690
	68	10×20	0.08	690
	100	12.5×20	0.08	820
	220	16×25	0.08	1250
	330	16×30	0.08	1480
	470	18×30	0.08	1530
100(2A)	22	10×12.5	0.08	390
	33	10×16	0.08	510
	47	10×20	0.08	640
	56	10×20	0.08	640
	68	12.5×20	0.08	760
	100	12.5×25	0.08	950
	220	16×30	0.08	1380
	330	18×30	0.08	1430
160(2C)	10	10×12.5	0.20	110
	15	10×12.5	0.20	110
	22	10×16	0.20	160
	33	12.5×20	0.20	230
	47	12.5×20	0.20	250
	56	12.5×25	0.20	270
	68	16×20	0.20	290
	100	16×25	0.20	300
200(2D)	6.8	10×12.5	0.20	83
	10	10×12.5	0.20	83
	15	10×16	0.20	130
	22	10×20	0.20	170
	33	12.5×20	0.20	210
	47	12.5×25	0.20	250
	56	16×20	0.20	270
	68	16×25	0.20	290
350V(2V)	4.7	10×16	0.24	77
	6.8	10×20	0.24	110
	10	12.5×20	0.24	120
	15	12.5×25	0.24	130
400V(2G)	4.7	10×20	0.24	83
	6.8	12.5×20	0.24	88
	10	12.5×25	0.24	105
	15	12.5×25	0.24	105