Best electrolytic capacitor manufacturers | what is electrolytic capacitor

01.

LGE Series

● Life time: +130℃ 3000 hours, +105℃ 12000 hours.
● Withstand high temperature +130℃, Miniaturized, Long life.
● Suitable for output circuit and input circuit of LED driving power.

● Sleeve color is Blackish green.

● RoHs Compliant.

Specification

LGE Series

Item

Performance Characteristics

Category Temperature Range

-40℃ to +130℃(160 to 400Vdc) -25℃ to +130℃(450Vdc) -25℃ to +105℃(500Vdc)

Rated voltage range

160 to 500Vdc

Capacitance tolerance

±20%(M)

Leakage Current Dissipation Factor (tan δ)

160 to 400Vdc : I≤0.02CV+10μA

450 to 500Vdc : I≤0.03CV +10μA

Where, I: Max. leakage current (μA), C: Nominal capacitance (μF), V: Rated voltage(V) ( at 20℃ after 2 minutes)

Dissipation Factor (tan δ)

Rated Voltage (Vdc)	160	200	250	350	400	450	500
tanδ(Max.)	0.15	0.15	0.15	0.20	0.20	0.20	0.24

(at 20℃，120Hz)

Low Temperature Characteristics (Max. Impedance Ratio)

Rated Voltage (Vdc)	160	200	250	350	400	450	500
Z(-25℃)/Z(+20℃)	3	3	3	5	5	6	6
Z(-40℃)/Z(+20℃)	6	6	6	6	6	-	-

( at 120Hz)

Endurance

The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied for 6000 hours at 105℃.

Capacitance change	≤±20% of the initial value.
D.F. (tan δ)	≤200% of the initial specified value.
Leakage current	≤ The initial specified value.

WV	130℃ Lifetime (hours)	105℃ Lifetime (hours)
160 to 450	3000	12000
500	-	10000

Shelf Life

The following specifications shall be satisfied when the capacitors performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20℃ after exposing them for 1000hours at 105℃ without voltage applied.

Capacitance change	≤±20% of the initial value.
D.F. (tan δ)	≤200% of the initial specified value.
Leakage current	≤The initial specified value.

DIMENSIONS [mm]

LGE Series

这里可以自定义设置

ΦD	5	6.3	8	10	12.5	16	18
φd	0.5	0.5	0.6	0.6	0.6	0.8	0.8
F	2.0	2.5	3.5	5.0	5.0	7.5	7.5
φD’				φD+0.5max.
L’				L+2.0max.

RATED RIPPLE CURRENT MULTIPLIERS

Frequency correction factor for ripple current

Freq.(Hz)	120	1k	10k	100k
WV	120	1k	10k	100k
Cap.＜33	0.40	0.70	0.90	1.00
Cap.≥33	0.50	0.80	0.90	1.00

STANDARD RATINGS

LGE Series

WV (Vdc)	Cap(μF)	Case size φD×L(mm)	tan δ	Ripple current mArms/105℃,100kHz
160(2C)	1	6.3×11	0.15	45
	1.5	6.3×11	0.15	50
	1.8	6.3×11	0.15	55
	2.2	6.3×11	0.15	61
	2.8	6.3×11	0.15	78
	3.3	6.3×11	0.15	92
	4.7	8×12	0.15	100
	5.6	8×12	0.15	107
	6.8	8×16	0.15	115
	8.2	8×16	0.15	189
	10	8×16	0.15	300
	15	8×20	0.15	350
	22	10×20	0.15	500
	33	10×20	0.15	650
	47	10×20	0.15	750
	68	12.5×20	0.15	1180
	100	12.5×25	0.15	1420
	150	16×25	0.15	1890
	220	18×25	0.15	2370
200(2D)	1	6.3×11	0.15	62
	1.5	6.3×11	0.15	66
	1.8	6.3×11	0.15	72
	2.2	6.3×11	0.15	81
	2.8	6.3×11	0.15	95
	3.3	6.3×11	0.15	112
	4.7	8×12	0.15	160
	5.6	8×12	0.15	190
	6.8	8×16	0.15	220
	8.2	8×16	0.15	279
	10	8×16	0.15	300
	10	10×16	0.15	320
	15	8×20	0.15	358
	22	10×16	0.15	500
	22	10×20	0.15	525
	33	10×20	0.15	650
	47	12.5×20	0.15	980
	68	12.5×25	0.15	1300
	68	16×20	0.15	1300
	82	16×20	0.15	1380
	100	16×20	0.15	1420
	100	16×25	0.15	1494
	150	16×25	0.15	1890
	150	16×30	0.15	1989
250(2E)	1	6.3×11	0.15	62
	1.5	6.3×11	0.15	66
	1.8	6.3×11	0.15	72
	2.2	6.3×11	0.15	81
	2.8	6.3×11	0.15	95
	3.3	6.3×11	0.15	112
	4.7	8×12	0.15	160
	5.6	8×12	0.15	190
	6.8	8×16	0.15	225
	8.2	8×20	0.15	288
	10	8×20	0.15	320
	15	8×20	0.15	420
	22	10×16	0.15	500
	22	10×20	0.15	550
	33	12.5×16	0.15	760
	33	12.5×20	0.15	800
	47	12.5×20	0.15	980
	56	12.5×25	0.15	1080
	68	16×25	0.15	1368
	82	12.5×30	0.15	1500
	100	16×30	0.15	1610
	150	16×35	0.15	2000
350(2V)	1	6.3×11	0.20	64
	1.5	8×12	0.20	75
	1.8	8×12	0.20	85
	2.2	8×12	0.20	95
	2.8	8×12	0.20	100
	3.3	8×12	0.20	118
	4.7	8×16	0.20	170
	5.6	8×16	0.20	200
	6.8	8×20	0.20	252
	6.8	10×16	0.20	252
	8.2	8×20	0.20	288
	10	8×20	0.20	320
	10	10×20	0.20	350
	15	10×20	0.20	450
	22	12.5×20	0.20	650
	33	12.5×20	0.20	855
	33	16×20	0.20	900
	47	16×20	0.20	1080
	68	18×20	0.20	1368
	68	18×25	0.20	1470
	82	18×25	0.20	1530
	100	18×30	0.20	1700
400(2G)	1	8×12	0.20	72
	1.5	8×12	0.20	90
	1.5	8×16	0.20	100
	1.8	8×12	0.20	95
	1.8	8×16	0.20	120
	2.2	8×12	0.20	100
	2.2	8×16	0.20	140
	2.8	8×16	0.20	145
	3.3	8×16	0.20	150
	3.3	10×16	0.20	180
	4.7	8×20	0.20	198
	4.7	10×16	0.20	220
	5.6	8×20	0.20	225
	5.6	10×16	0.20	250
	6.8	8×20	0.20	252
	6.8	10×16	0.20	265
	8.2	10×16	0.20	288
	8.2	10×20	0.20	294
	10	10×20	0.20	350
	15	12.5×20	0.20	550
	22	12.5×25	0.20	760
	22	16×20	0.20	760
	33	16×20	0.20	900
	33	16×25	0.20	1125
	47	16×30	0.20	1180
	47	18×25	0.20	1180
	56	18×25	0.20	1476
	68	18×30	0.20	1547
	100	18×40	0.20	1718
450(2W)	1	8×12	0.20	82
	1.5	8×12	0.20	88
	1.8	8×12	0.20	90
	2.2	8×16	0.20	96
	2.8	8×16	0.20	119
	3.3	8×16	0.20	128
	4.7	10×16	0.20	180
	5.6	10×20	0.20	250
	6.8	10×20	0.20	265
	8.2	10×20	0.20	280
	10	10×25	0.20	330
	15	12.5×20	0.20	450
	22	12.5×25	0.20	600
	22	16×20	0.20	730
	33	16×25	0.20	980
	47	16×35	0.20	1080
	47	18×25	0.20	1200
	56	18×30	0.20	1429
	68	18×35	0.20	1500
	100	18×40	0.20	1666
500(2H)	10	12.5×20	0.24	320
	10	12.5×25	0.24	336
	15	12.5×25	0.24	440
	15	16×20	0.24	440
	22	12.5×35	0.24	560
	22	16×25	0.24	560
	33	18×25	0.24	700
	47	18×30	0.24	880