How to correctly replace the capacitor|Focus on medium and high-end brand capacitor manufacturers

The method of replacing the capacitor is very simple. Open the circuit board to find the capacitor, use a soldering pen to remove the capacitor, and then replace it with a new one. When replacing capacitors, pay attention to the fact that the capacitance difference of 30-50% will not have a significant impact and can be replaced, but the withstand voltage value must be greater than or equal to the original value. 6.3V can use 10V or higher withstand voltage (here is just an example), but generally the higher the voltage, the larger the volume, as long as it can be installed. Replace the capacitor with the original model as much as possible. For the original capacity, the withstand voltage value should be equal to or greater than the original product. If it is a non-inductive capacitor, it cannot be replaced with a CBB type inductive capacitor. If the original aluminum electrolytic capacitor has swelled or leaked, find out the reason to avoid damage after replacement. Electrolytic capacitors that have been stored for a long time should be tested for leakage before use.

Shenzhen Shen MaoXin Electronics Co., Ltd. is recognized as one of the leading manufacturer of in China.Trust in us and make Shenzhen Shen MaoXin Electronics Co., Ltd. your electrolytic capacitor supplier. Our products will bring more economic value to you.

Applied Materials’ mission is to be the leading supplier of electrolytic capacitor worldwide-through innovation and enhancement of customer productivity with systems and service solutions.

The electrolytic capacitor suppliers electrolytic capacitor is an all-servo system capable of storing hundreds of electrolytic capacitor suppliers process parameters to provide custom electrolytic capacitor suppliers profiles for each electrolytic capacitor suppliers type and electrolytic capacitor suppliers configuration.