How to test the quality of electrolytic capacitors | Focus on high-end brand capacitor manufacturers

To know the quality of electrolytic capacitors, it is intuitive and accurate to measure with the resistance profile of a multimeter. We all know that the capacity of electrolytic capacitors is much larger than that of general fixed capacitors. Therefore, when measuring, choose a suitable range for different capacities. According to experience, in general, the capacitance between 1 and 47μF can be measured with the R×1k block, and the capacitance larger than 47μF can be measured with the R×100 block. First, connect the red test lead of the multimeter to the negative pole and the black test lead to the positive pole. At the moment of contact, the pointer of the multimeter will deflect to the right by a greater degree (for the same electrical barrier, the greater the capacity, the greater the swing), and then gradually turn to the left Until it stops at a certain position. The resistance at this time is the forward leakage resistance of the electrolytic capacitor, which is slightly larger than the reverse leakage resistance. Practical experience shows that the leakage resistance of electrolytic capacitors should generally be more than several hundred kΩ, otherwise, it will not work normally. In the test, if there is no charging phenomenon in the forward and reverse directions, that is, the hand does not move, it means that the capacity has disappeared or the internal circuit is broken; if the measured resistance value is very small or zero, it means that the capacitor has a large leakage or has been broken down. Can no longer be used. For electrolytic capacitors with unknown positive and negative signs, the above-mentioned leakage resistance measurement method can be used to distinguish. That is to measure the leakage resistance arbitrarily, remember its size, and then exchange the test leads to measure a resistance value. The larger resistance of the two measurements is the positive connection, that is, the black test lead is connected to the positive electrode, and the red test lead is connected to the negative electrode. Use a multimeter to block electricity and charge the electrolytic capacitor in forward and reverse directions. According to the magnitude of the pointer swing to the right, the capacity of the electrolytic capacitor can be estimated.

electrolytic capacitor are all following the most compatible manufacturing regulations.

Shenzhen Shen MaoXin Electronics Co., Ltd. didn’t receive any negative feedback from our customers before, which proves that customers have faith in us.

Oftentimes for Shenzhen Shen MaoXin Electronics Co., Ltd., this means look for the impact. Giving people something to believe in, that emotional connection, that's what electrolytic capacitor.

Shenzhen Shen MaoXin Electronics Co., Ltd. provides a way for you to understand your customers, to learn what makes them unique and what motivates their behavior. We can then leverage that wealth of information to personalize our interactions and demonstrate that electrolytic capacitor is valuable to our customers.

The more people who do a certain thing, the more likely others are to do it as well. When Shenmao can demonstrate their popularity or satisfaction across a wide customer base, other consumers are more likely to buy in as well.